GnosisConnect LMS

Safety Professional Certificate (SPC)

SPC01

25 Courses

$5995.00

(Premium Membership) $5495.00 $5995.00

Safety Professional Certificate (SPC)

242:00 hours / 24.20 CEUs

Description: The Safety Professional Certificate (SPC) is the highest certificate offered by NASP and includes a robust curriculum designed to enhance your knowledge in occupational safety and health. This professional development program will give you the knowledge necessary to tackle the safety challenges that face your organization, develop practical solutions, and apply the skills necessary to maintain a truly safe workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 242 hours. You have up to six months to complete the course. Our Safety Professional Certificate (SPC) will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager, and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze, and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage safety in your workplace, with emphasis on Behavior Based Safety Prerequisites and Authorization: The Safety Professional Certificate is a stand-alone Certificate. However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SPC requires successful completion of 25 areas of specialization listed below. Continuing Education Units: (24.20) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive a Certificate. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $595. Upon completion of this Refresher course, the student does not earn CEUs. This Refresher course does not require the student to view all material to proceed to the next module. IACET does not allow NASP/IASP to issue CEUs for recertification when students may simply take the recertification exam without viewing course materials. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Safety Director Certificate (SDC)

SDC02

23 Courses

$3995.00

(Premium Membership) $3495.00 $3995.00

Safety Director Certificate (SDC)

121:00 hours / 12.10 CEUs

In today’s hectic workplace, safety professionals are tasked with a variety of day-to-day health and safety responsibilities. The Safety Director Certificate (SDC) curriculum provides an in-depth look at the standards safety professionals encounter each day and offers a solid foundation of knowledge for students to apply to the safety challenges they may face. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 121 hours. You have up to six months to complete the course. Our Safety Director Certificate (SDC) Certification Course will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage it effectively at your facility, with emphasis on how to gain management commitment and employee involvement. Prerequisites and Authorization: The SDC is a stand-alone certificate. However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SDC requires successful completion of 20 areas of specialization listed below. Continuing Education Units: (12.10) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $495. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Safety Manager (CSM)

CSM002

18 Courses

$1995.00

(Premium Membership) $1795.00 $1995.00

Certified Safety Manager (CSM)

40:00 hours / 4.00 CEUs

Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry. Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager (CSM) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSM is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager (CSM) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link. Continuing Education Units: Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Safety Manager: Constructio ...

CSMC02

18 Courses

$1995.00

(Premium Membership) $1795.00 $1995.00

Certified Safety Manager: Constructio ...

40:00 hours / 4.00 CEUs

Description: This Construction Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the construction industry. Creating a safety culture, especially in construction, can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries wherever construction activities may occur. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager: Construction (CSMC) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSMC is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMC is authorized to teach the following courses by NASP. Click here for details. Continuing Education Units: Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Safety Manager - Healthcare ...

CSMH01

16 Courses

$1995.00

(Premium Membership) $1795.00 $1995.00

Certified Safety Manager - Healthcare ...

40:00 hours / 4.00 CEUs

Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the healthcare industry. Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Upon successful completion of this course, the student will attain the designation of Certified Safety Manager Healthcare (CSMH). With this certificate, the student will have acquired the knowledge, skills, and abilities to: Identify important concepts in understanding workplace safety and adult learning style training methods to implement an effective safety program Describe the OSHA reporting process and identify new recordkeeping requirements for an OSHA-compliant workplace Identify safety management systems and ways to engage leadership and involve employees so that implementation of safety management systems is effective Identify root cause analysis tools that contribute to a comprehensive incident analysis Recognize and identify common terms and concepts used for chemicals in the workplace so that hazards can be addressed safely Identify and differentiate various hazard labeling systems to ensure clear and effective hazard communication in the workplace Define confined spaces and identify OSHA’s confined space requirements to ensure safe work practices and conditions Describe proper lockout tagout training and protocol that exceeds OSHA compliance so that workers are protected from hazardous equipment Identify the impact of workplace violence and describe effective response techniques to implement an effective violence prevention program Identify various types and characteristics of personal protective equipment so appropriate protection can be used in the workplace Identify who develops a job hazard analysis and aspects of developing a risk matrix so that an effective analysis can be completed Identify hazards of moving machine parts and the proper safeguards so that equipment can be operated safely Identify the musculoskeletal disorders, controls, and challenges associated with workplace ergonomics so that an effective ergonomics program can be implemented Identify common walking/working surface hazards and controls associated with “slips, trips, and falls” so that these types of accidents can be addressed in a workplace safety program Define basic electrical terms and identify hazards associated with electrical sources to implement an effective electrical safety program Recognize potential sources of bloodborne pathogens in the workplace and implement control measures to reduce infection Implement the proper elements of an infectious disease plan to deter the spread and infection of disease in patients and employees Identify the hazards disinfectants and sterilants commonly used in the healthcare field Prerequisites and Authorization: The CSMH is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMH is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager Healthcare (CSMH) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMHs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link. Continuing Education Units: Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Environmental Manager (CEM)

CEM02

12 Courses

$2295.00

(Premium Membership) $2095.00 $2295.00

Certified Environmental Manager (CEM)

40:00 hours / 4.00 CEUs

Description: This Certified Environmental Manager (CEM) is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the environmental programs, policies, and procedures common to business and industry. This course will provide the tools necessary to implement proper environmental compliance and an effective environmental program. Students will learn how to understand and interpret EPA regulations, how to better comply with these regulations, how to minimize civil and criminal liability, and how to create a workplace free from environmentally-recognized hazards that are common to industry, construction and governmental agencies. The average completion time for the course is approximately 40 hours. You have up to six months to complete the course. Our Certified Environmental Manager (CEM) Course will allow you to do the following: Understand the requirements and practices necessary to maintain clean air and water at your facility Know the chemical terms and concepts necessary to understand the information available to you concerning the hazardous chemicals you may encounter Recognize labels and Safety Data Sheets for the hazardous chemicals found in your facility Comprehend the overview of the environmental-related plans, programs, policies, and procedures required Understand Spill Prevention and Planning techniques Identify the use and limitations of the DOT Emergency Response Guide Understand what hazardous waste is along with proper handling, storage, and disposal of hazwastes at a facility Conduct audits of your current safety or environmental management system to determine compliance with various standards, including VPP, ANSI Z10, I2P2, ISO 45001, and ISO 14001. Prerequisites: The Certified Environmental Manager (CEM) Course is a foundational course that requires no prerequisites. Continuing Education Units: Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam for this course. You must score 80% to receive the certificate of completion. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

HAZWOPER Train-the-Trainer

HTTTP01

18 Courses

$1995.00

(Premium Membership) $1795.00 $1995.00

HAZWOPER Train-the-Trainer

40:00 hours / 4.00 CEUs

Description: This state-of-the-art course will cover in detail the regulatory and training requirements of the Hazardous Waste Operation and Emergency Response (29 CFR 1910.120) standard. OSHA states that a measure of the competence of an instructor is the successful completion of a train-the-trainer program with training and experience specific to the topics they will teach. This course meets the Appendix E HAZWOPER training requirements. Practical training must also be obtained to qualify yourself to meet the ‘experiential' requirements of the standard. Students will receive: 2020 Emergency Response Guidebook NIOSH Pocket Guide to Chemical Hazards Sample Plans, Programs, Audits and Checklists 16 Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Authorization: This Train-the-Trainer meets the academic requirements of the topics below for individuals wishing to teach. A student who takes this course, and who has practical experience, will be qualified to train on the following topics: HAZMAT EMERGENCY RESPONSE AWARENESS HAZMAT EMERGENCY RESPONSE OPERATIONS HAZMAT EMERGENCY RESPONSE TECHNICIAN HAZMAT EMERGENCY RESPONSE SPECIALIST HAZMAT EMERGENCY RESPONSE INCIDENT COMMANDER HAZMAT EMERGENCY RESPONSE REFRESHER HAZWOPER GENERAL SITE WORKER (24 AND 40 HOUR) HAZWOPER GENERAL SITE WORKER SUPERVISOR HAZWOPER GENERAL SITE WORKER REFRESHER HAZWOPER FOR TSD FACILITIES HAZARD COMMUNICATION AND GHS DOT HAZMAT AWARENESS PPE AND RESPIRATORY PROTECTION Prerequisites: The HAZWOPER Train-the-Trainer Course is a foundational course that requires no prerequisites. Continuing Education Units: Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher exam will be required every three (3) years. The cost of this recertification is $495. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

10-HR Construction

10HRCC01

10:00 hours / 1.00 CEUs

$49.00

10-HR Construction

Catalog

10:00 hours / 1.00 CEUs

Description: The NASP 10-hour Construction training is designed for entry-level workers to act as an orientation to occupational safety and health. This course will help teach you how to improve workplace safety and recognize hazards covered by OSHA 29 CFR Part 1926. As a student, you will learn industry best practices for reducing incidents and injuries, the major hazards you might encounter in construction work, and solutions to recognize, control, and protect against them. Students must receive additional training, as required by OSHA standards, on specific hazards of the job in addition to this training. Upon successful completion of the course, participants will receive a NASP 10-Hour Construction certificate and wallet card. Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA. Recognize OSHA Standards references applicable to specific hazardous conditions and practices Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions) Implement preventative measures for accidents in their workplace Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards Recognize the requirements for fire protection in the workplace Identify types of rigging equipment used to protect employees Identify the critical health and safety hazards of welding and cutting in the construction industry Identify common electrical hazards and related OSHA standards Understand the importance of scaffolding for workers in elevated workplaces Implement measures for protecting workers and equipment from dangerous falls Recognize the hazards associated with working in or around excavation sites Identify the safety requirements necessary to protect workers around concrete and masonry jobs Identify the precautions and hazards to protect workers using explosives or blasting agents Protect workers who perform jobs on or around stairways or ladders at worksites List and describe the hazards and prevalence of confined spaces Prerequisites: The 10-HR Construction Course is a foundational course that requires no prerequisites. Continuing Education Units: One (1.00) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: This course does not require a refresher; however, it is strongly recommended that employees take this course at least once every five years to stay up-to-date regarding regulatory changes. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

10-HR Construction (Spanish)

10HRCS01

10:00 hours / 1.00 CEUs

$49.00

10-HR Construction (Spanish)

Catalog

10:00 hours / 1.00 CEUs

Description: The NASP 10-hour Construction training is designed for entry-level workers to act as an orientation to occupational safety and health. This course will help teach you how to improve workplace safety and recognize hazards covered by OSHA 29 CFR Part 1926. As a student, you will learn industry best practices for reducing incidents and injuries, the major hazards you might encounter in construction work, and solutions to recognize, control, and protect against them. Students must receive additional training, as required by OSHA standards, on specific hazards of the job in addition to this training. Upon successful completion of the course, participants will receive a NASP 10-Hour Construction certificate and wallet card. Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA. Recognize OSHA Standards references applicable to specific hazardous conditions and practices Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions) Implement preventative measures for accidents in their workplace Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards Recognize the requirements for fire protection in the workplace Identify types of rigging equipment used to protect employees Identify the critical health and safety hazards of welding and cutting in the construction industry Identify common electrical hazards and related OSHA standards Understand the importance of scaffolding for workers in elevated workplaces Implement measures for protecting workers and equipment from dangerous falls Recognize the hazards associated with working in or around excavation sites Identify the safety requirements necessary to protect workers around concrete and masonry jobs Identify the precautions and hazards to protect workers using explosives or blasting agents Protect workers who perform jobs on or around stairways or ladders at worksites List and describe the hazards and prevalence of confined spaces Prerequisites: The 10-HR Construction Course is a foundational course that requires no prerequisites. Continuing Education Units: One (1.00) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: This course does not require a refresher; however, it is strongly recommended that employees take this course at least once every five years to stay up-to-date regarding regulatory changes. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

30-HR Construction

30HRCC02

30:00 hours / 3.00 CEUs

$149.00

30-HR Construction

Catalog

30:00 hours / 3.00 CEUs

Description: The NASP 30-hour Construction training is designed for managers and supervisors to act as a guide to growing and nurturing a safety culture in your workplace. This course will provide a comprehensive overview of OSHA’s policies, procedures, and standards covered by 29 CFR Part 1926. As a student, you will learn about the basic elements of a workplace safety and health program and how to manage them. This includes understanding your employer's responsibilities for worker safety, as well as you and your employee’s rights to learn about the potential hazards of your job.  Students must receive additional training, as required by OSHA standards, on specific hazards of the job in addition to this training. Upon successful completion of the course, participants will receive a NASP 30-Hour Construction certificate and wallet card. Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA Understand how management plays a role to create a healthy and safe work environment Identify the struck-by and caught-in or caught-between hazards associated with serious construction-related injuries Recognize the appropriate PPE to use based on a workplace evaluation and the types of hazards present Distinguish hazards posed by lead, asbestos, and crystalline silica in construction and how to control and avoid them Recognize the elements of the Hazard Communication Standard, recognize the information required on Safety Data Sheets (SDS) and warning labels, as well as how they are used and maintained the Globally Harmonized System (GHS) Interpret safe work practices for electricity, including recognizing electrical terms, basic electrical safety principles, and electrical safety regulations Recognize the safety hazards associated with non-powered hand tools and identify hazards related to powered hand tools Recognize types of fall hazards and how to prevent falls in your work environment by using appropriate fall protection Identify the dangers involved in excavations and the safe work practices for employees working in or near trenches and excavations Recognize the types of scaffolds and how to safely use them Identify the safety requirements for working with or near cranes, including how to avoid accidents and how to recognize hazards Recognize safe operating procedures for forklifts, workplace hazards, and how to handle special types of forklifts Identify a confined space, its hazards, the OSHA requirements for confined spaces, and the duties and responsibilities of confined space workers Identify methods of fire prevention and describe OSHA requirements for fire protection Outline the general safety requirements for welding and cutting and list the safety precautions Identify the OSHA safety requirements for construction operations involving concrete, masonry, and steel erection activities Prerequisites: The 30-HR Construction Course is a foundational course that requires no prerequisites. Continuing Education Units: Three (3.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: This course does not require a refresher; however, it is strongly recommended that employees take this course at least once every five years to stay up-to-date regarding regulatory changes. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Safety Manager Classroom

CSMTW2023

1 Classes

Certified Safety Manager Classroom

Catalog

1 Classes

REGISTRATION: 1.Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered).2.Apply Coupon Code, if applicable.3.If paying with a check, send payment to: NASP/IASP, PO Box 3367, Wilmington NC 28406.4.If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details.5.Once completed, you will receive confirmation letter via email.6.Click here for details on our cancelation/student transfer policy. Certified Safety Manager Course Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.• Discover a brand new perspective of safety that will empower you • Meet the Train-the-Trainer requirements for individuals doing in-house training • Learn training methodologies that change the way your employees work • Save money by developing your own safety plans, programs and training • Avoid OSHA fines, civil and criminal liability for accidents and injuries • Determine proper interpretation and application of OSHA regulations • Create and manage a successful safety culture using the latest behavior modification techniques • Take home a resource library of PowerPoints, sample plans, programs and inspection checklists • Obtain valuable CEUs (4.0) required by current certifications • Click here to see the daily class scheduleCreating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: • Student Reference Manual and Handout Materials • All 1910 and 1926 CFRs • Sample Plans and Programs • Sample Audit and Checklist Forms • More than 50 Customizable Powerpoints • Student Outlines, Handouts, and Tests to be Used at Your Facility Prerequisites and Authorization: The CSM is a foundational course that requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. Continuing Education Units : Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Exam: The student will take an exam at the end of the course. You must score 80% to receive a Certificate. You have two opportunities to pass the exam. An online retake exam will be provided if the first attempt is unsuccessful. Testimonials: Click here to see what our students have been saying about this course. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm Monday - Thursday and Friday 8:00 am with dismissal at 3:00 pm. The training venue is located at 1575 Sawdust Road, Suite 600, The Woodlands, TX 77380. Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. If you have three (3) or more students, call us at 800 922-2219 and speak to a customer service representative for assistance. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a 10% admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance. In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals. For Information on Additional Course Dates and Locations: Click here. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Certified Safety Manager Classroom

CSMLV2024

1 Classes

Certified Safety Manager Classroom

Catalog

1 Classes

REGISTRATION: 1.Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered).2.Apply Coupon Code, if applicable.3.If paying with a check, send payment to: NASP/IASP, PO Box 3367, Wilmington NC 28406.4.If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details.5.Once completed, you will receive confirmation letter via email.6.Click here for details on our cancelation/student transfer policy. Certified Safety Manager Course Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.• Discover a brand new perspective of safety that will empower you • Meet the Train-the-Trainer requirements for individuals doing in-house training • Learn training methodologies that change the way your employees work • Save money by developing your own safety plans, programs and training • Avoid OSHA fines, civil and criminal liability for accidents and injuries • Determine proper interpretation and application of OSHA regulations • Create and manage a successful safety culture using the latest behavior modification techniques • Take home a resource library of PowerPoints, sample plans, programs and inspection checklists • Obtain valuable CEUs (4.0) required by current certifications • Click here to see the daily class scheduleCreating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: • Student Reference Manual and Handout Materials • All 1910 and 1926 CFRs • Sample Plans and Programs • Sample Audit and Checklist Forms • More than 50 Customizable Powerpoints • Student Outlines, Handouts, and Tests to be Used at Your Facility Prerequisites and Authorization: The CSM is a foundational course that requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. Continuing Education Units : Four (4.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Exam: The student will take an exam at the end of the course. You must score 80% to receive a Certificate. You have two opportunities to pass the exam. An online retake exam will be provided if the first attempt is unsuccessful. Testimonials: Click here to see what our students have been saying about this course. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm Monday - Thursday and Friday 8:00 am with dismissal at 3:00 pm. Lunch will be provided Monday, Wednesday, & Friday, with snacks and refreshments served daily. Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. If you have three (3) or more students, call us at 800 922-2219 and speak to a customer service representative for assistance. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a 10% admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance. In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals. For Information on Additional Course Dates and Locations: Click here. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.