Safety Professional Certificate (SPC)

Safety Professional Certificate (SPC)

  • NA
  • SPC01
  • class25 Courses
  • access_time242:00 hours / 24.20 CEUs
$5995.00
$5995.00 $5495.00 (Premium Membership)
The Safety Professional Certificate is the highest certificate offered by NASP and indicates the highest level of proficiency. The Safety Professional Certificate program is an indication of a level of proficiency expected of a safety professional who is capable of developing and managing a comprehensive facility-wide or corporate safety program and supervising others to do the same. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 242 hours. You have up to six months to complete the course. Our Safety Professional Certificate (SPC) will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager, and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze, and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage safety in your workplace, with emphasis on Behavior Based Safety Prerequisites and Authorization: The Safety Professional Certificate is a stand-alone Certificate.  However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SPC requires successful completion of 25 areas of specialization listed below. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive a Certificate. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $595. Upon completion of this Refresher course, the student does not earn CEUs. This Refresher course does not require the student to view all material to proceed to the next module. IACET does not allow NASP/IASP to issue CEUs for recertification when students may simply take the recertification exam without viewing course materials. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Safety Director Certificate (SDC)

Safety Director Certificate (SDC)

  • NA
  • SDC02
  • class23 Courses
  • access_time121:00 hours / 12.10 CEUs
$3995.00
$3995.00 $3495.00 (Premium Membership)
The NASP Safety Director Certificate (SDC) indicates a high level of proficiency and is one of the most sought after certificates in the industry. The Safety Director Certificate is an indication of a level of proficiency expected of a safety professional who is capable of developing and managing a comprehensive facility-wide or corporate safety program. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 121 hours. You have up to six months to complete the course. Our Safety Director Certificate (SDC) Course will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager, and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze, and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage it effectively at your facility, with emphasis on how to gain management commitment and employee involvement. Prerequisites and Authorization: The SDC Certificate is a stand-alone Certificate. However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SDC requires successful completion of 23 areas of specialization listed below. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive Certificate. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $495. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager (CSM)

Certified Safety Manager (CSM)

  • NA
  • CSM002
  • class18 Courses
  • access_time40:00 hours / 4.00 CEUs
$1995.00
$1995.00 $1795.00 (Premium Membership)
This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.  Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager (CSM) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSM is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager (CSM) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager: Construction (CSMC)

Certified Safety Manager: Construction (CSMC)

  • NA
  • CSMC02
  • class18 Courses
  • access_time40:00 hours / 4.00 CEUs
$1995.00
$1995.00 $1795.00 (Premium Membership)
This Construction Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the construction industry. Creating a safety culture, especially in construction, can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries wherever construction activities may occur. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager: Construction (CSMC) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSMC is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMC is authorized to teach the following courses by NASP. Click here for details. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager - Healthcare (CSMH)

Certified Safety Manager - Healthcare (CSMH)

  • NA
  • CSMH01
  • class16 Courses
  • access_time40:00 hours / 4.00 CEUs
$1995.00
$1995.00 $1795.00 (Premium Membership)
This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the healthcare industry. Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Prerequisites and Authorization: The CSMH is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMH is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager Healthcare (CSMH) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMHs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link.  Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Environmental Manager (CEM)

Certified Environmental Manager (CEM)

  • NA
  • CEM02
  • class12 Courses
  • access_time40:00 hours / 4.00 CEUs
$2295.00
$2295.00 $2095.00 (Premium Membership)
This Certified Environmental Manager (CEM) is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the environmental programs, policies, and procedures common to business and industry. This course will provide the tools necessary to implement proper environmental compliance and an effective environmental program. Students will learn how to understand and interpret EPA regulations, how to better comply with these regulations, how to minimize civil and criminal liability, and how to create a workplace free from environmentally-recognized hazards that are common to industry, construction and governmental agencies. The average completion time for the course is approximately 40 hours. You have up to six months to complete the course. Our Certified Environmental Manager (CEM) Course will allow you to do the following: Understand the requirements and practices necessary to maintain clean air and water at your facility Know the chemical terms and concepts necessary to understand the information available to you concerning the hazardous chemicals you may encounter Recognize labels and Safety Data Sheets for the hazardous chemicals found in your facility Comprehend the overview of the environmental-related plans, programs, policies, and procedures required Understand Spill Prevention and Planning techniques Identify the use and limitations of the DOT Emergency Response Guide Understand what hazardous waste is along with proper handling, storage, and disposal of hazwastes at a facility Conduct audits of your current safety or environmental management system to determine compliance with various standards, including VPP, ANSI Z10, I2P2, ISO 45001, and ISO 14001. Online Exams: The student will take a comprehensive online exam for this course. You must score 80% to receive the certificate of completion. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Environmental Health and Safety Professional Certificate (EHS)

Environmental Health and Safety Professional Certificate (EHS)

  • Catalog
  • EHS01
  • access_time24:00 hours / 2.40 CEUs
$995.00
$995.00 $895.00 (Premium Membership)
This course is designed for the busy professional who desires to improve his or her knowledge and credentials but has little time for classroom training. This independent study course consists of ten assignments that can be completed at the student's own pace and earns a Professional Certification in Environmental Health & Safety. Understanding the quagmire of OSHA, EPA, DOT and other applicable regulations can be an overwhelming task.  The Environmental Health & Safety Professional Certificate course clarifies your responsibilities in workplace safety and environmental protection and ensures that you have both the "know how" and the resources to meet those responsibilities. This independent study is excellent for the new Safety and/or Environmental Manager, the experienced Safety and/or Environmental Manager who wants an update, or the Safety and/or Environmental Manager who wants to achieve certification. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 24 hours. You have up to six months to complete the course. Introduction to Occupational Safety and Environmental Protection Introduction to Hazardous Materials Identification Hazardous Materials and Waste Identification Spill Containment and Response Inspections, Citations and Penalties OSHA Required Plans and Programs Advanced OSHA Compliance Certification: Environmental Health & Safety Professional Certificate (EHS) Course Requirements: This is a stand-alone course with no additional components. The ten lessons are available by computer downloads. At the end of each lesson, there are exercises to be completed and returned. When all exercises have been submitted, you will then take a final online exam. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass the exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $250.
HAZWOPER Train-the-Trainer

HAZWOPER Train-the-Trainer

  • NA
  • HTTTP01
  • class18 Courses
  • access_time40:00 hours / 4.00 CEUs
$1995.00
$1995.00 $1795.00 (Premium Membership)
This state-of-the-art course will cover in detail the regulatory and training requirements of the Hazardous Waste Operation and Emergency Response (29 CFR 1910.120) standard. OSHA states that a measure of the competence of an instructor is the successful completion of a train-the-trainer program with training and experience specific to the topics they will teach. This course meets the Appendix E HAZWOPER training requirements. Practical training must also be obtained to qualify yourself to meet the ‘experiential' requirements of the standard.   Students will receive: 2020 Emergency Response Guidebook NIOSH Pocket Guide to Chemical Hazards Sample Plans, Programs, Audits and Checklists 16 Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units: Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam.
Workplace Ergonomics Specialist Live Course

Workplace Ergonomics Specialist Live Course

  • WELFL2022
  • access_time16:00 hours / 1.60 CEUs
  • Oct 05, 2022 - Oct 06, 2022
  • State: FloridaCity/Town: Orlando

$1095.00
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email. Click here for details on our cancellation/student transfer policy.  Workplace Ergonomics Course Description: Work-related musculoskeletal disorders (MSDs) result when there is a mismatch between the physical capacity of workers and the demands of the job. Musculoskeletal disorders are the leading cause of disability of people in their working years, afflicting over 19 million workers.  After completion of this training, the student will have acquired the knowledge, skills and abilities to: Define ergonomics and identify different types of musculoskeletal disorder injuries (MSD) to recognize the importance of ergonomics in the workplace. Identify the signs, symptoms, and significance of MSD injuries in the workplace to better understand the industry recommendations and guidelines for ergonomics. Identify important events and decisions in the history of ergonomics to recognize changes in attitudes and actions concerning ergonomics in the workplace. Identify ergonomic risk factors inherent in the employee, job, and environment to be able to evaluate these risks in the workplace. Recognize risk factor controls that best suit the level of risk identified in the workplace so that MSD injuries can be prevented. Describe the elements of an effective ergonomics program so that these elements can be implemented in the workplace. Identify the roles and responsibilities of employers, employees, and medical providers in an ergonomics program so that the program can be implemented effectively. Describe best practices in ergonomics for a variety of environments and industries in order to prevent MSD injuries in specific workplaces. Use the Strain Index and RULA Assessment Tools to analyze jobs with ergonomic risk factors associated with the upper extremities. Use the NIOSH Lifting Guidelines and Manual Materials Handling Tables to analyze jobs with ergonomic risk factors associated with the low back. Determine post-injury management best practices. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great.   Students will receive: Student Reference Manual and Handout Materials Sample Ergonomic Plans and Programs Sample Ergonomic Audit and Checklist Forms Customizable PowerPoints About the Instructors:  This course is co-instructed by Mr. Eric Gislason of NASP, the leader in innovative safety training, and Dr. James Rethaber of Fit For Work, the industry leader in injury prevention and workplace safety solutions with 350+ partnerships spread out over 1,500+ locations. We will introduce students to basic ergonomic principles and address topics such as musculoskeletal disorders (MSDs), identifying and prioritizing ergonomic stressors, determining root causes, analysis techniques, developing appropriate control measures, cost justification, and design criteria. This course prepares the participants to work in a team environment to conduct ergonomics assessments for the control of risk factors that cause MSDs. Who Should Attend? This course is designed for individuals who desire the necessary knowledge and skills to help reduce work-related musculoskeletal and nerve disorders through application of ergonomic control measures and designs. Individuals benefiting from this course include, but are not limited to, ergonomic team leaders, safety specialists, safety managers, OT and PTs, nurses, industrial hygienists, healthcare professionals, engineers, line managers, and others with responsibilities to reduce ergonomically-related workplace injuries. Continuing Education Units (CEUs): 1.6 CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam.  Testimonials: Click here to see what our students have been saying about our courses.  Recertification: An optional refresher course is recommended every three (3) years. The cost of this recertification is $195. Class Information: The class will be held from 8:00 am to 5:00 pm Wednesday and Thursday. Lunch will be provided both days with snacks and refreshments served daily.  Group Pricing: Three or more students from the same company will receive a $100 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.)  Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here. 
40 Hour Confined Space Entry & Rescue Train-The-Trainer

40 Hour Confined Space Entry & Rescue Train-The-Trainer

  • CSRTTTILM20221
  • access_time40:00 hours / 4.00 CEUs
  • Oct 31, 2022 - Nov 04, 2022
  • State: North CarolinaCity/Town: Wilmington

$2495.00
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for the class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email.  Click here for details on our cancelation/student transfer policy. Confined Space Entry & Rescue Train-the-Trainer Overview This intensive, hands-on course aboard the Battleship USS North Carolina will use adult training methodologies and provide an understanding of the concept of a confined space and the various elements that may require a permit to be issued. The course focuses on assessing the hazards that may be present in a confined space and the appropriate means of elimination. It delves into the proper implementation of a comprehensive confined space entry program with an emphasis on hazard identification and the elements of an effective confined space permit. Roles, responsibilities, and training requirements of all CSE personnel will be thoroughly covered. Our Confined Space Entry & Rescue Train-the-Trainer Certification Covers: • Definition of Confined Space (three elements)• Examples & Assessment Procedures• Concept of Isolation (Lockout Tagout, blanking and blinding)• Hazardous Atmospheres (oxygen, flammables, toxic, dust)• Atmospheric Monitoring & Associated Equipment• Environmental Hazards & Engulfment Hazards• Confined Space Configurations• Elements of a Permit (issuance, use, restrictions, and record-keeping)• Entrant, Attendant, Supervisor, Rescue Service Members• Personal Protective Equipment (including use of SCBA)• Non-entry Rescue Equipment and Procedures (tripods and other extrication devices)• Vertical Entries (basic repelling systems)• Horizontal Entries (non-line of sight rescues)• Entry Equipment (winch/davit, mechanical advantage systems, others) **Please note: this course will require intensive, physical, hands-on training. Over 70% of this course is hands-on in a confined space. Various confined space rescue simulations and skill stations will be performed by all team members throughout the week. Medical clearance for the use of SCBA is recommended but not required. Dress appropriately. This course meets NFPA 1006 and 1670 Technician level and OSHA 1910.146 standards and response guidelines. In addition, the course will include the following rescue concepts:• CSR checklists• Team entry operations• Command and support operations• Ropes, knots, and auxiliary equipment• Mechanical advantage systems• Multiple rescuer entries• IDLH atmosphere entries for rescue• Air system selection and use• Patient packaging and removal operations ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: Student Reference Manual and Handout Materials All 1910 and 1926 CFRs Sample Plans and Programs Sample Audit and Checklist Forms Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units: Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Find out more about this class: Click here to see what this class is all about. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm, Monday – Thursday, and Friday 8:00 am to 4:00 pm. Class is held in the Ward Room, on the USS North Carolina Battleship (http://www.battleshipnc.com). Lunch will be provided Monday, Wednesday, & Friday, with snacks and refreshments served daily. Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here. 
Certified Safety Manager Classroom

Certified Safety Manager Classroom

  • CSMRAL2022
  • access_time40:00 hours / 4.00 CEUs
  • Sep 12, 2022 - Sep 16, 2022
  • State: North CarolinaCity/Town: Raleigh

$2295.00
REGISTRATION: 1.Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered).2.Apply Coupon Code, if applicable.3.If paying with a check, send payment to: NASP/IASP, PO Box 3367, Wilmington NC 28406.4.If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details.5.Once completed, you will receive confirmation letter via email.6.Click here for details on our cancelation/student transfer policy. Certified Safety Manager Course Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.• Discover a brand new perspective of safety that will empower you • Meet the Train-the-Trainer requirements for individuals doing in-house training • Learn training methodologies that change the way your employees work • Save money by developing your own safety plans, programs and training • Avoid OSHA fines, civil and criminal liability for accidents and injuries • Determine proper interpretation and application of OSHA regulations • Create and manage a successful safety culture using the latest behavior modification techniques • Take home a resource library of PowerPoints, sample plans, programs and inspection checklists • Obtain valuable CEUs (4.0) required by current certifications • Click here to see the daily class scheduleCreating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: • Student Reference Manual and Handout Materials • All 1910 and 1926 CFRs • Sample Plans and Programs • Sample Audit and Checklist Forms • More than 50 Customizable Powerpoints • Student Outlines, Handouts, and Tests to be Used at Your Facility Prerequisites and Authorization: The CSM is a foundational course that requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. Continuing Education Units : Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Testimonials: Click here to see what our students have been saying about this course. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm Monday - Thursday and Friday 8:00 am with dismissal at 3:00 pm. Lunch will be provided Monday, Wednesday, & Friday, with snacks and refreshments served daily Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here.
HAZWOPER Train-The-Trainer Course Classroom

HAZWOPER Train-The-Trainer Course Classroom

  • HTTTL92022
  • access_time40:00 hours / 4.00 CEUs
  • Sep 26, 2022 - Sep 30, 2022
  • State: TexasCity/Town: Houston

$2495.00
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for the class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email.  Click here for details on our cancelation/student transfer policy. HAZWOPER Train-The-Trainer (HTTT) Course Description This state-of-the-art course will cover in detail the regulatory and training requirements of the Hazardous Waste Operation and Emergency Response (29 CFR 1910.120) standard. OSHA states that a measure of the competence of an instructor is the successful completion of a train-the-trainer program with training and experience specific to the topics they will teach. Not only does the course review the various elements of the HAZWOPER standard, there are also demonstrations as well as "hands-on," practical simulations to meet the experiential requirements of the regulation. Who should attend? Anyone involved in environmental clean up or HAZMAT emergency response will benefit from this course. This includes an Environmental or Safety Director or Manager, Emergency Responder, Incident Commander, Safety Trainer, Plant Manager, Production or Maintenance Manager, Public Works or Utilities Director, Fire Chief, Waste Site Supervisor, Waste Treatment Facilitator, Project Supervisor or TSD Facility Supervisor. Course Composition: EMPLOYEE TRAINING Learning Objectives Training and Testing Methodology Training Adult Learners Learning Styles Instructional Strategies OSHA Training Guidelines (Appendix E) Rescue REGULATORY OVERVIEW OSH Act, EPA CERCLA/SARA RCRA and Others Interrelation of OSHA, EPA and DOT CHEMISTRY/TOXICOLOGY/INDUSTRIAL HYGIENE Terms and Concepts SDS Review & Hazard Labeling Systems Routes of Entry & Dose/Response Relationship Toxic Effects of Exposure WRITTEN PROGRAM REQUIREMENTS Safety and Health and Emergency Response Medical Surveillance, Respirator Programs Spill Containment and Contingency Plan HAZARD EVALUATION Types and Measures of Hazards Hazard Assessment Incidental vs. Emergency Response MONITORING REQUIREMENTS Site Monitoring Personal Monitoring EMERGENCY RESPONSE PROCEDURES Recognition and Prevention Communications and Security Evacuation Routes, Procedures & Safe Distances DECONTAMINATION Purpose and Prevention Decontamination Methods and Plan Disposal Methods PERSONAL PROTECTIVE EQUIPMENT Developing a PPE Program EPA Levels of Protection Respiratory Protective Equipment Selection, Use, Maintenance and Limitations MEDICAL SURVEILLANCE PROGRAM Hazardous Waste Site Workers Emergency Responders Occupational Exposure Monitoring and Exams Lifestyle Risk Factors MITIGATION OF HAZARDS Fire and Explosion Hazards Confined Space Entry and Rescue Mechanical, Physical, Electrical Noise, Biologic, and Temperature Extremes Medical First Aid and Treatment Bloodborne Pathogens SPILL AND LEAK CONTROL Drum Plugging and Patching Bulk and Pressurized Containers Landborne/Waterborne Dyking/Diverting Incident Command System Students will Receive: 2020 Emergency Response Guidebook NIOSH Pocket Guide to Chemical Hazards Sample Plans, Programs, Audits and Checklists Eight complimentary training videos 16 Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units : Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Authorization: Upon completion of this course, students will be qualified to train on the following topics: HAZMAT EMERGENCY RESPONSE AWARENESS HAZMAT EMERGENCY RESPONSE OPERATIONS HAZMAT EMERGENCY RESPONSE TECHNICIAN HAZMAT EMERGENCY RESPONSE SPECIALIST HAZMAT EMERGENCY RESPONSE INCIDENT COMMANDER HAZMAT EMERGENCY RESPONSE REFRESHER HAZWOPER GENERAL SITE WORKER (24 AND 40 HOUR) HAZWOPER GENERAL SITE WORKER SUPERVISOR HAZWOPER GENERAL SITE WORKER REFRESHER HAZWOPER FOR TSD FACILITIES HAZARD COMMUNICATION AND GHS DOT HAZMAT AWARENESS PPE AND RESPIRATORY PROTECTION Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $495. Airport Transportation in Houston: The hotel provides a complimentary shuttle from the airport. The Hilton Garden Inn Houston Hobby Airport located just 1.2 miles from (HOU) Hobby Airport, and offers airport shuttle Mon thru Fri 5am to 10pm. Hotel Accommodations: The host hotel for the event is the Hilton Garden Inn Houston Hobby Airport, 8001 Monroe Blvd. Houston, TX 77061. They have multiple rooms blocked for attendees, and you will receive a special room rate of $129 (+ 17% tax). We will provide a hotel booking link via email to receive the discounted room rate upon registration. Meals: Lunch is included with your tuition costs and will be served at the venue Monday, Wednesday, & Friday. Snacks and refreshments will be served daily. Class Schedule: Monday-Thursday 8-5 & Friday 8-3, with the class being held at the Hilton Garden Inn Houston Hobby Airport, the conference room is the Astro room. Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here for a complete listing of scheduled courses.
Safety Professional Certificate (SPC)
$5995.00
(Premium Membership) $5495.00 $5995.00

Safety Professional Certificate (SPC)

  • access_time242:00 hours / 24.20 CEUs
The Safety Professional Certificate is the highest certificate offered by NASP and indicates the highest level of proficiency. The Safety Professional Certificate program is an indication of a level of proficiency expected of a safety professional who is capable of developing and managing a comprehensive facility-wide or corporate safety program and supervising others to do the same. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 242 hours. You have up to six months to complete the course. Our Safety Professional Certificate (SPC) will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager, and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze, and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage safety in your workplace, with emphasis on Behavior Based Safety Prerequisites and Authorization: The Safety Professional Certificate is a stand-alone Certificate.  However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SPC requires successful completion of 25 areas of specialization listed below. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive a Certificate. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $595. Upon completion of this Refresher course, the student does not earn CEUs. This Refresher course does not require the student to view all material to proceed to the next module. IACET does not allow NASP/IASP to issue CEUs for recertification when students may simply take the recertification exam without viewing course materials. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Safety Director Certificate (SDC)

Safety Director Certificate (SDC)

  • SDC02
  • class23 Courses
$3995.00
(Premium Membership) $3495.00 $3995.00

Safety Director Certificate (SDC)

  • access_time121:00 hours / 12.10 CEUs
The NASP Safety Director Certificate (SDC) indicates a high level of proficiency and is one of the most sought after certificates in the industry. The Safety Director Certificate is an indication of a level of proficiency expected of a safety professional who is capable of developing and managing a comprehensive facility-wide or corporate safety program. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 121 hours. You have up to six months to complete the course. Our Safety Director Certificate (SDC) Course will allow you to do the following: Develop advanced workplace safety management techniques Discover a brand new perspective of safety that will empower you Perform as a safety expert, manager, and administrator Learn training methodologies that change the way your employees work Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze, and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Develop, implement, and manage your own safety programs, saving your company money Learn requirements with OSHA compliance, workplace safety related EPA guidelines and relevant DOT regulations. Manage hazardous materials Learn techniques to prevent workplace violence Develop proper response to emergencies and implement an emergency management program Gain a comprehensive understanding of workplace safety and how to manage it effectively at your facility, with emphasis on how to gain management commitment and employee involvement. Prerequisites and Authorization: The SDC Certificate is a stand-alone Certificate. However, NASP/IASP's designations are designed to be achieved in a step by step building block process where each level achieved is a step toward the next higher level. Obtaining the SDC requires successful completion of 23 areas of specialization listed below. Online Exams: The student will take an online exam at the end of each specialist course. You must score 80% to receive Certificate. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $495. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager (CSM)

Certified Safety Manager (CSM)

  • CSM002
  • class18 Courses
$1995.00
(Premium Membership) $1795.00 $1995.00

Certified Safety Manager (CSM)

  • access_time40:00 hours / 4.00 CEUs
This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.  Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager (CSM) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSM is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager (CSM) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager: Construction (CSMC)
$1995.00
(Premium Membership) $1795.00 $1995.00

Certified Safety Manager: Constructio ...

  • access_time40:00 hours / 4.00 CEUs
This Construction Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the construction industry. Creating a safety culture, especially in construction, can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries wherever construction activities may occur. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Our Certified Safety Manager: Construction (CSMC) Certificate will allow you to do the following: Study of primary, OSHA required, workplace safety topics Information to qualify you as a safety expert and manager Learn training methodologies that change the way your employees work Save money by developing your own safety programs Avoid civil and criminal liability for accidents and injuries Determine proper interpretation and application of OSHA regulations Establish acceptable analysis and documentation of workplace hazards Manage workplace safety inspections and audits Investigate, analyze and document workplace accidents and root cause analysis Create and manage a successful safety culture using the latest behavior modification techniques Prerequisites and Authorization: The CSMC is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMC is authorized to teach the following courses by NASP. Click here for details. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Safety Manager - Healthcare (CSMH)
$1995.00
(Premium Membership) $1795.00 $1995.00

Certified Safety Manager - Healthcare ...

  • access_time40:00 hours / 4.00 CEUs
This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to the healthcare industry. Creating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 40 hours. You have up to six months to complete the course. Prerequisites and Authorization: The CSMH is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSMH is authorized to teach the following courses by NASP. Click here for details. The Certified Safety Manager Healthcare (CSMH) may issue NASP/IASP certificates for courses found on the link above. They may represent themselves as NASP/IASP Certified Trainers. They may use the NASP/IASP name and logo on their website and in other advertising, but they may not represent themselves as being NASP/IASP. CSMHs may advertise themselves as an NASP/IASP Certified Trainer for any safety courses they may teach, whether or not the course is found on the link above, and issue their own certificates without the NASP/IASP name or logo. Details may also be found in the link.  Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Certified Environmental Manager (CEM)
$2295.00
(Premium Membership) $2095.00 $2295.00

Certified Environmental Manager (CEM)

  • access_time40:00 hours / 4.00 CEUs
This Certified Environmental Manager (CEM) is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the environmental programs, policies, and procedures common to business and industry. This course will provide the tools necessary to implement proper environmental compliance and an effective environmental program. Students will learn how to understand and interpret EPA regulations, how to better comply with these regulations, how to minimize civil and criminal liability, and how to create a workplace free from environmentally-recognized hazards that are common to industry, construction and governmental agencies. The average completion time for the course is approximately 40 hours. You have up to six months to complete the course. Our Certified Environmental Manager (CEM) Course will allow you to do the following: Understand the requirements and practices necessary to maintain clean air and water at your facility Know the chemical terms and concepts necessary to understand the information available to you concerning the hazardous chemicals you may encounter Recognize labels and Safety Data Sheets for the hazardous chemicals found in your facility Comprehend the overview of the environmental-related plans, programs, policies, and procedures required Understand Spill Prevention and Planning techniques Identify the use and limitations of the DOT Emergency Response Guide Understand what hazardous waste is along with proper handling, storage, and disposal of hazwastes at a facility Conduct audits of your current safety or environmental management system to determine compliance with various standards, including VPP, ANSI Z10, I2P2, ISO 45001, and ISO 14001. Online Exams: The student will take a comprehensive online exam for this course. You must score 80% to receive the certificate of completion. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.
Environmental Health and Safety Professional Certificate (EHS)

Environmental Health and Safety Profe ...

  • EHS01
  • access_time24:00 hours / 2.40 CEUs
$995.00
(Premium Membership) $895.00 $995.00

Environmental Health and Safety Profe ...

  • Catalog
  • access_time24:00 hours / 2.40 CEUs
This course is designed for the busy professional who desires to improve his or her knowledge and credentials but has little time for classroom training. This independent study course consists of ten assignments that can be completed at the student's own pace and earns a Professional Certification in Environmental Health & Safety. Understanding the quagmire of OSHA, EPA, DOT and other applicable regulations can be an overwhelming task.  The Environmental Health & Safety Professional Certificate course clarifies your responsibilities in workplace safety and environmental protection and ensures that you have both the "know how" and the resources to meet those responsibilities. This independent study is excellent for the new Safety and/or Environmental Manager, the experienced Safety and/or Environmental Manager who wants an update, or the Safety and/or Environmental Manager who wants to achieve certification. The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 24 hours. You have up to six months to complete the course. Introduction to Occupational Safety and Environmental Protection Introduction to Hazardous Materials Identification Hazardous Materials and Waste Identification Spill Containment and Response Inspections, Citations and Penalties OSHA Required Plans and Programs Advanced OSHA Compliance Certification: Environmental Health & Safety Professional Certificate (EHS) Course Requirements: This is a stand-alone course with no additional components. The ten lessons are available by computer downloads. At the end of each lesson, there are exercises to be completed and returned. When all exercises have been submitted, you will then take a final online exam. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass the exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $250.
HAZWOPER Train-the-Trainer

HAZWOPER Train-the-Trainer

  • HTTTP01
  • class18 Courses
$1995.00
(Premium Membership) $1795.00 $1995.00

HAZWOPER Train-the-Trainer

  • access_time40:00 hours / 4.00 CEUs
This state-of-the-art course will cover in detail the regulatory and training requirements of the Hazardous Waste Operation and Emergency Response (29 CFR 1910.120) standard. OSHA states that a measure of the competence of an instructor is the successful completion of a train-the-trainer program with training and experience specific to the topics they will teach. This course meets the Appendix E HAZWOPER training requirements. Practical training must also be obtained to qualify yourself to meet the ‘experiential' requirements of the standard.   Students will receive: 2020 Emergency Response Guidebook NIOSH Pocket Guide to Chemical Hazards Sample Plans, Programs, Audits and Checklists 16 Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units: Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam.
Workplace Ergonomics Specialist Live Course
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email. Click here for details on our cancellation/student transfer policy.  Workplace Ergonomics Course Description: Work-related musculoskeletal disorders (MSDs) result when there is a mismatch between the physical capacity of workers and the demands of the job. Musculoskeletal disorders are the leading cause of disability of people in their working years, afflicting over 19 million workers.  After completion of this training, the student will have acquired the knowledge, skills and abilities to: Define ergonomics and identify different types of musculoskeletal disorder injuries (MSD) to recognize the importance of ergonomics in the workplace. Identify the signs, symptoms, and significance of MSD injuries in the workplace to better understand the industry recommendations and guidelines for ergonomics. Identify important events and decisions in the history of ergonomics to recognize changes in attitudes and actions concerning ergonomics in the workplace. Identify ergonomic risk factors inherent in the employee, job, and environment to be able to evaluate these risks in the workplace. Recognize risk factor controls that best suit the level of risk identified in the workplace so that MSD injuries can be prevented. Describe the elements of an effective ergonomics program so that these elements can be implemented in the workplace. Identify the roles and responsibilities of employers, employees, and medical providers in an ergonomics program so that the program can be implemented effectively. Describe best practices in ergonomics for a variety of environments and industries in order to prevent MSD injuries in specific workplaces. Use the Strain Index and RULA Assessment Tools to analyze jobs with ergonomic risk factors associated with the upper extremities. Use the NIOSH Lifting Guidelines and Manual Materials Handling Tables to analyze jobs with ergonomic risk factors associated with the low back. Determine post-injury management best practices. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great.   Students will receive: Student Reference Manual and Handout Materials Sample Ergonomic Plans and Programs Sample Ergonomic Audit and Checklist Forms Customizable PowerPoints About the Instructors:  This course is co-instructed by Mr. Eric Gislason of NASP, the leader in innovative safety training, and Dr. James Rethaber of Fit For Work, the industry leader in injury prevention and workplace safety solutions with 350+ partnerships spread out over 1,500+ locations. We will introduce students to basic ergonomic principles and address topics such as musculoskeletal disorders (MSDs), identifying and prioritizing ergonomic stressors, determining root causes, analysis techniques, developing appropriate control measures, cost justification, and design criteria. This course prepares the participants to work in a team environment to conduct ergonomics assessments for the control of risk factors that cause MSDs. Who Should Attend? This course is designed for individuals who desire the necessary knowledge and skills to help reduce work-related musculoskeletal and nerve disorders through application of ergonomic control measures and designs. Individuals benefiting from this course include, but are not limited to, ergonomic team leaders, safety specialists, safety managers, OT and PTs, nurses, industrial hygienists, healthcare professionals, engineers, line managers, and others with responsibilities to reduce ergonomically-related workplace injuries. Continuing Education Units (CEUs): 1.6 CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam.  Testimonials: Click here to see what our students have been saying about our courses.  Recertification: An optional refresher course is recommended every three (3) years. The cost of this recertification is $195. Class Information: The class will be held from 8:00 am to 5:00 pm Wednesday and Thursday. Lunch will be provided both days with snacks and refreshments served daily.  Group Pricing: Three or more students from the same company will receive a $100 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.)  Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here. 
40 Hour Confined Space Entry & Rescue Train-The-Trainer

40 Hour Confined Space Entry & Rescue ...

  • CSRTTTILM20221
  • class1 Classes
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for the class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email.  Click here for details on our cancelation/student transfer policy. Confined Space Entry & Rescue Train-the-Trainer Overview This intensive, hands-on course aboard the Battleship USS North Carolina will use adult training methodologies and provide an understanding of the concept of a confined space and the various elements that may require a permit to be issued. The course focuses on assessing the hazards that may be present in a confined space and the appropriate means of elimination. It delves into the proper implementation of a comprehensive confined space entry program with an emphasis on hazard identification and the elements of an effective confined space permit. Roles, responsibilities, and training requirements of all CSE personnel will be thoroughly covered. Our Confined Space Entry & Rescue Train-the-Trainer Certification Covers: • Definition of Confined Space (three elements)• Examples & Assessment Procedures• Concept of Isolation (Lockout Tagout, blanking and blinding)• Hazardous Atmospheres (oxygen, flammables, toxic, dust)• Atmospheric Monitoring & Associated Equipment• Environmental Hazards & Engulfment Hazards• Confined Space Configurations• Elements of a Permit (issuance, use, restrictions, and record-keeping)• Entrant, Attendant, Supervisor, Rescue Service Members• Personal Protective Equipment (including use of SCBA)• Non-entry Rescue Equipment and Procedures (tripods and other extrication devices)• Vertical Entries (basic repelling systems)• Horizontal Entries (non-line of sight rescues)• Entry Equipment (winch/davit, mechanical advantage systems, others) **Please note: this course will require intensive, physical, hands-on training. Over 70% of this course is hands-on in a confined space. Various confined space rescue simulations and skill stations will be performed by all team members throughout the week. Medical clearance for the use of SCBA is recommended but not required. Dress appropriately. This course meets NFPA 1006 and 1670 Technician level and OSHA 1910.146 standards and response guidelines. In addition, the course will include the following rescue concepts:• CSR checklists• Team entry operations• Command and support operations• Ropes, knots, and auxiliary equipment• Mechanical advantage systems• Multiple rescuer entries• IDLH atmosphere entries for rescue• Air system selection and use• Patient packaging and removal operations ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: Student Reference Manual and Handout Materials All 1910 and 1926 CFRs Sample Plans and Programs Sample Audit and Checklist Forms Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units: Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Find out more about this class: Click here to see what this class is all about. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm, Monday – Thursday, and Friday 8:00 am to 4:00 pm. Class is held in the Ward Room, on the USS North Carolina Battleship (http://www.battleshipnc.com). Lunch will be provided Monday, Wednesday, & Friday, with snacks and refreshments served daily. Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here. 
Certified Safety Manager Classroom

Certified Safety Manager Classroom

  • CSMRAL2022
  • class1 Classes

Certified Safety Manager Classroom

  • Catalog
  • class1 Classes
REGISTRATION: 1.Click on ADD TO CART and fill out Payment Information. (You must pay for class in advance to be registered).2.Apply Coupon Code, if applicable.3.If paying with a check, send payment to: NASP/IASP, PO Box 3367, Wilmington NC 28406.4.If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details.5.Once completed, you will receive confirmation letter via email.6.Click here for details on our cancelation/student transfer policy. Certified Safety Manager Course Description: This Safety Manager Certificate is an indication to employers, potential employers, regulatory agencies, and the courts that you have the knowledge, skills, and abilities equivalent to a level of proficiency expected of a professional who is capable of working with little or no supervision while managing the safety programs, policies, and procedures common to business and industry.• Discover a brand new perspective of safety that will empower you • Meet the Train-the-Trainer requirements for individuals doing in-house training • Learn training methodologies that change the way your employees work • Save money by developing your own safety plans, programs and training • Avoid OSHA fines, civil and criminal liability for accidents and injuries • Determine proper interpretation and application of OSHA regulations • Create and manage a successful safety culture using the latest behavior modification techniques • Take home a resource library of PowerPoints, sample plans, programs and inspection checklists • Obtain valuable CEUs (4.0) required by current certifications • Click here to see the daily class scheduleCreating a safety culture in the workplace can be difficult. This course will provide the tools necessary to implement proper safety training and an effective safety program. Students will learn how to understand and interpret regulations, avoid civil and criminal liability, increase worker morale, reduce workers comp rates and most importantly, minimize or eliminate injuries in the workplace. ***Click here to see what our customers are saying. ***Click here to see what makes our classes so great. Students will receive: • Student Reference Manual and Handout Materials • All 1910 and 1926 CFRs • Sample Plans and Programs • Sample Audit and Checklist Forms • More than 50 Customizable Powerpoints • Student Outlines, Handouts, and Tests to be Used at Your Facility Prerequisites and Authorization: The CSM is a foundational course that requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. Upon completion, a CSM is authorized to teach the following courses by NASP. Click here for details. Continuing Education Units : Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Testimonials: Click here to see what our students have been saying about this course. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $395. Class Information: The class will be held from 8:00 am to 5:00 pm Monday - Thursday and Friday 8:00 am with dismissal at 3:00 pm. Lunch will be provided Monday, Wednesday, & Friday, with snacks and refreshments served daily Group Pricing: Three or more students from the same company will receive a $200 discount per student if they sign up for the same course date and location. (May not combine with other promotional discounts.) Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here.
HAZWOPER Train-The-Trainer Course Classroom
REGISTRATION: Click on ADD TO CART and fill out Payment Information. (You must pay for the class in advance to be registered). Apply Coupon Code, if applicable. If paying with a check, please contact customer support and send payment to: NASP/IASP, PO Box 3367, Wilmington, NC 28406. If you are traveling from overseas, you must pay in advance and then you will receive a letter of invitation so you may apply for a VISA. Click here for details. Once payment is received, you will receive a confirmation letter via email.  Click here for details on our cancelation/student transfer policy. HAZWOPER Train-The-Trainer (HTTT) Course Description This state-of-the-art course will cover in detail the regulatory and training requirements of the Hazardous Waste Operation and Emergency Response (29 CFR 1910.120) standard. OSHA states that a measure of the competence of an instructor is the successful completion of a train-the-trainer program with training and experience specific to the topics they will teach. Not only does the course review the various elements of the HAZWOPER standard, there are also demonstrations as well as "hands-on," practical simulations to meet the experiential requirements of the regulation. Who should attend? Anyone involved in environmental clean up or HAZMAT emergency response will benefit from this course. This includes an Environmental or Safety Director or Manager, Emergency Responder, Incident Commander, Safety Trainer, Plant Manager, Production or Maintenance Manager, Public Works or Utilities Director, Fire Chief, Waste Site Supervisor, Waste Treatment Facilitator, Project Supervisor or TSD Facility Supervisor. Course Composition: EMPLOYEE TRAINING Learning Objectives Training and Testing Methodology Training Adult Learners Learning Styles Instructional Strategies OSHA Training Guidelines (Appendix E) Rescue REGULATORY OVERVIEW OSH Act, EPA CERCLA/SARA RCRA and Others Interrelation of OSHA, EPA and DOT CHEMISTRY/TOXICOLOGY/INDUSTRIAL HYGIENE Terms and Concepts SDS Review & Hazard Labeling Systems Routes of Entry & Dose/Response Relationship Toxic Effects of Exposure WRITTEN PROGRAM REQUIREMENTS Safety and Health and Emergency Response Medical Surveillance, Respirator Programs Spill Containment and Contingency Plan HAZARD EVALUATION Types and Measures of Hazards Hazard Assessment Incidental vs. Emergency Response MONITORING REQUIREMENTS Site Monitoring Personal Monitoring EMERGENCY RESPONSE PROCEDURES Recognition and Prevention Communications and Security Evacuation Routes, Procedures & Safe Distances DECONTAMINATION Purpose and Prevention Decontamination Methods and Plan Disposal Methods PERSONAL PROTECTIVE EQUIPMENT Developing a PPE Program EPA Levels of Protection Respiratory Protective Equipment Selection, Use, Maintenance and Limitations MEDICAL SURVEILLANCE PROGRAM Hazardous Waste Site Workers Emergency Responders Occupational Exposure Monitoring and Exams Lifestyle Risk Factors MITIGATION OF HAZARDS Fire and Explosion Hazards Confined Space Entry and Rescue Mechanical, Physical, Electrical Noise, Biologic, and Temperature Extremes Medical First Aid and Treatment Bloodborne Pathogens SPILL AND LEAK CONTROL Drum Plugging and Patching Bulk and Pressurized Containers Landborne/Waterborne Dyking/Diverting Incident Command System Students will Receive: 2020 Emergency Response Guidebook NIOSH Pocket Guide to Chemical Hazards Sample Plans, Programs, Audits and Checklists Eight complimentary training videos 16 Customizable PowerPoints Student Outlines, Handouts and Tests to be Used at Your Facility Continuing Education Units : Four (4.0) CEUs are offered for this course. NASP is accredited by the International Association of Continuing Education (IACET) to issue CEUs. These will be reflected on the Certificate upon successful completion of the course and passing the exam. Authorization: Upon completion of this course, students will be qualified to train on the following topics: HAZMAT EMERGENCY RESPONSE AWARENESS HAZMAT EMERGENCY RESPONSE OPERATIONS HAZMAT EMERGENCY RESPONSE TECHNICIAN HAZMAT EMERGENCY RESPONSE SPECIALIST HAZMAT EMERGENCY RESPONSE INCIDENT COMMANDER HAZMAT EMERGENCY RESPONSE REFRESHER HAZWOPER GENERAL SITE WORKER (24 AND 40 HOUR) HAZWOPER GENERAL SITE WORKER SUPERVISOR HAZWOPER GENERAL SITE WORKER REFRESHER HAZWOPER FOR TSD FACILITIES HAZARD COMMUNICATION AND GHS DOT HAZMAT AWARENESS PPE AND RESPIRATORY PROTECTION Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $495. Airport Transportation in Houston: The hotel provides a complimentary shuttle from the airport. The Hilton Garden Inn Houston Hobby Airport located just 1.2 miles from (HOU) Hobby Airport, and offers airport shuttle Mon thru Fri 5am to 10pm. Hotel Accommodations: The host hotel for the event is the Hilton Garden Inn Houston Hobby Airport, 8001 Monroe Blvd. Houston, TX 77061. They have multiple rooms blocked for attendees, and you will receive a special room rate of $129 (+ 17% tax). We will provide a hotel booking link via email to receive the discounted room rate upon registration. Meals: Lunch is included with your tuition costs and will be served at the venue Monday, Wednesday, & Friday. Snacks and refreshments will be served daily. Class Schedule: Monday-Thursday 8-5 & Friday 8-3, with the class being held at the Hilton Garden Inn Houston Hobby Airport, the conference room is the Astro room. Cancellation Policy: We hope you do not have to cancel; however, if you need to cancel, cancellation notices received in writing seven (7) or more days before the first day of class will be refunded in full, minus a $50 admin fee. Cancellations received less than seven (7) days before the first day of class will be refunded 75% of the course fee in the form of an NASP Voucher for future training. Unused Vouchers expire one year after the date of issue. Substitutions are welcomed. No shows and cancellations received after the start of class will not be eligible for a refund. This policy will be enforced so please plan ahead. If you need to cancel call us at 800 922-2219 and speak to a customer service representative for assistance.  In the unlikely event that a course must be canceled by NASP, student will receive a full reimbursement of tuition costs. NASP is not responsible for travel and per diem that may be incurred by student. This includes, but is not limited to, airfare, hotel accommodations, rental vehicles, or meals.   For Information on Additional Course Dates and Locations: Click here for a complete listing of scheduled courses.
View
Pageof 6
Previous Next