Description: With the rise of drive-by ADA lawsuits in the United States, it is incumbent upon business owners and operators alike to ensure ADA compliance within their organizations. Title III prohibits discrimination on the basis of disability in the activities of places of public accommodations and requires newly constructed or altered places of public accommodation—as well as commercial facilities to comply with the ADA Standards. This course provides in-depth guidance on the ADA accessibility standards so that students of this course are properly equipped to inspect, assess, and make improvements to your facility to prevent future ADA litigation. This course also discusses the rise of drive-by and surf-by ADA lawsuits and provides case studies with which to better understand precedent-setting case law. Upon successful completion of this topic, the student will have the knowledge, skills, and abilities to: Understand the applicability of ADA Title II and III regulations to private employers Interpret ADA Accessibility guidelines to ensure compliance within your organization Apply the building accessibility requirements for new construction, building alterations, and building additions Analyze the requirements for interior and exterior accessible routes to include walking surfaces, ramps, elevators, and lifts Determine the required accessible routes for your facility Interpret the requirements for entrances, doors, and gates within your facility Apply the requirements for accessible parking located on or within your facility to include number of spaces, means of egress, size, and location Inspect your facility for compliance with ADA regulations encompassing toilet and bathing rooms, lavatories, and sinks Prerequisites: The ADA Compliance Certificate Course is a foundational course that requires no prerequisites. Continuing Education Units: (1.60) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This course will provide a student with the knowledge necessary to work safely with and around aerial and scissor lifts. The student will be able to recognize different types and uses for various lifts, identify hazards during use and operation, and implement safe work practices when working with the equipment.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Recognize different types and uses for aerial and scissor lifts. Identify hazards of aerial and scissor lift use and operation. Select inspection criteria for the vehicle, the lift, and the work surroundings prior to lift operation. Identify safe work practice for operating aerial and scissor lifts.   Prerequisites: The Aerial and Scissor Lift Specialist (ASLS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (0.80) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $95.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This online course provides a foundational understanding of key Occupational and Environmental Health and Safety concepts as the basis for the anticipation, recognition, evaluation, and control of workplace hazards. This course is perfect for early career health and safety professionals, occupational and environmental health and safety students, occupational health specialists, and other industry specialists who want a broader understanding of how recognizing and controlling workplace hazards is key to keeping workers safe.   The required amount of time to complete the course is dependent upon your knowledge of workplace safety, but we find that the average completion time is approximately 10 hours. You have up to six months to complete the course.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: The value of occupational hygiene and the role of the occupational hygienist The fundamentals of anatomy and toxicology The range of hazards (physical and chemical) in the workplace, including sources and potential routes of exposure Hazard evaluation, exposure assessment, and sampling processes Basic methods of controlling exposure Potential career paths for OEHS professionals   Prerequisites and Authorization: The Basic Principles of Occupational Hygiene is a foundational course which requires no prerequisites; however, prior knowledge of workplace safety is highly recommended. This online self-study course will benefit those new to occupational and environmental health and safety, current health and safety professionals, and occupational health specialists (including physicians and nurses).   Specialists in subjects such as acoustics, ergonomics (human factors), work organization, biosafety, engineering, or analytical chemistry will gain a broader appreciation of how their role helps protect workers from workplace-related hazards and health issues.    [Copyright © 2021 by AIHA® All rights reserved. No part of this course may be reproduced in any form or by any other means— graphic, electronic, or mechanical, including photocopying, taping, or information storage or retrieval systems—without written permission from the AIHA.]   Continuing Education Units: One (1.0) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam.   Recertification: This course has no recertification requirements.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This is an intensive independent study course that gives you a comprehensive understanding of workplace safety and teaches you how to manage safety in your workplace. This course discusses all of the primary facets of workplace safety and how they interrelate. Included is the latest advancement in workplace safety - Behavior-Based Safety. Behavior-Based Safety is based on the proven principles of Organizational Behavior Management. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will attain the designation of Behavior Based Safety Specialist (BBS). With this certificate, the student will have acquired the knowledge, skills, and abilities to: Obtain information to present to upper management to get their buy-in to the support a behavior-based safety program. Create a list of critical behaviors (at-risk and safe) to guide the implementation of a successful BBS program. Create an observation checklist based on the identified critical behaviors. Learn how to positive and negative reinforcement affects behavior. Implement a successful BBS program. Measure the performance of the BBS program. Understand the hierarchy of needs and how people are motivated. Apply the principles of the human dynamics of behavior.   Prerequisites: The Behavior Based Safety Specialist (BBS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (1.30) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This is an independent study course that gives the student a comprehensive understanding of bloodborne pathogens, the routes of exposure, how to implement an exposure control plan, and how to keep employees from being exposed to bloodborne pathogens. This course also discusses first aid requirements per OSHA and ANSI standards as exposure to bloodborne pathogens can occur during first aid treatment. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will have the knowledge, skills and abilities to:  Define bloodborne pathogens and those illnesses that pose the most serious health threats in the workplace. Describe the methods by which bloodborne pathogens can be transmitted. Define the approach of universal precautions and identify the various engineering, administrative and personal protective equipment control measures that are available. Identify the key elements of an Exposure Control Plan, to include a Hepatitis B Vaccination Program. Describe the medical evaluation program and follow-up procedures once an exposure incident has occurred. Identify the actions to be taken once an exposure incident has occurred, including first aid and other medical services. Define first aid and the requirements associated with the provision of services to workplace employees. Describe the major components of a first aid training program provided to employees.   Prerequisites: The Bloodborne Pathogens and First Aid Treatment Specialist (BPS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (0.80) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $95.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This course provides an understanding of the concept of a confined space and the various elements that may require a permit to be issued. The course focuses on assessing the hazards that may be present in a confined space and the proper means of the elimination. It delves into the proper implementation of a comprehensive confined space entry program with an emphasis on hazard identification and the elements of an effective confined space permit. Roles, responsibilities and training requirements of all CSE personnel will be thoroughly covered. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will attain the designation of Confined Space Entry Specialist (CSS). With this certificate, the student will have acquired the knowledge, skills, and abilities to: Interpret the requirements of the permit space entry program Differentiate between the four categories of confined space workers Describe the purpose of confined space ventilation Analyze factors that limit the effectiveness of oxygen, combustible gas, and toxic meter indicators Recognize the different types of protective clothing, their limitations, and use in confined space entry Explain the concept of relative response Describe the differences various types of respirators, their use, and how to properly select them based on confined space hazards Discuss lockout/tagout and other procedures for isolating confined spaces Describe the effects of environmental conditions, properties of the hazardous material, and interferences on monitoring strategies List the components of a rescue system Illustrate the components of an emergency decontamination plan List features that must be considered when selecting air monitoring devices Describe the various equipment used for ventilating confined spaces while being able to identify factors to consider when developing ventilation systems in a confined space Identify examples of hazards found in confined spaces Demonstrate understanding of calibration drift, the possible causes, and how to validate readings   Prerequisites: The Confined Space Entry Specialist (CSS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (1.30) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This course provides an understanding of the concept of a confined space and the various elements that may require a permit to be issued. The course focuses on assessing the hazards that may be found on construction site confined spaces and the proper means of the elimination of hazards and means for entry. It delves into the proper implementation of a comprehensive confined space entry program with an emphasis on hazard identification and the elements of an effective confined space permit. Roles, responsibilities and training requirements of all CSE personnel will be thoroughly covered. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course. Upon successful completion of this course, the student will attain the designation of Confined Space Entry Specialist Construction (CSSC). With this certificate, the student will have acquired the knowledge, skills, and abilities to: Interpret the requirements of the permit space entry program Differentiate between the four categories of confined space workers Describe the purpose of confined space ventilation Analyze factors that limit the effectiveness of oxygen, combustible gas, and toxic meter indicators Recognize the different types of protective clothing, their limitations, and use in confined space entry Explain the concept of relative response Describe the differences various types of respirators, their use, and how to properly select them based on confined space hazards Discuss lockout/tagout and other procedures for isolating confined spaces Describe the effects of environmental conditions, properties of the hazardous material, and interferences on monitoring strategies List the components of a rescue system Illustrate the components of an emergency decontamination plan List features that must be considered when selecting air monitoring devices Describe the various equipment used for ventilating confined spaces while being able to identify factors to consider when developing ventilation systems in a confined space Identify examples of hazards found in confined spaces Demonstrate understanding of calibration drift, the possible causes, and how to validate readings Prerequisites: The Confined Space Entry Specialist - Construction Course is a foundational course that requires no prerequisites. Continuing Education Units: (0.80) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This is an independent study course that gives you a comprehensive understanding of infectious disease, how to prepare your company for a pandemic, and how to build an Infectious Disease Preparedness and Response Plan. This course discusses risk reduction strategies to lower transmission rates of infectious disease in the workplace and provides a variety of methods to reduce employee exposure. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Recall previous pandemics and understand how they shaped pandemic response in the United States Complete an Infection Prevention Risk Assessment to assess and identify risks in the workplace Build and implement an Infectious Disease Preparedness and Response Plan (IDPR) Classify worker exposure to infectious disease Define job responsibilities as it relates to implementing and following infectious disease plan Develop risk reduction strategies to lower transmission rates of infectious disease in the workplace Communicate to, and train employees on, newly implemented infectious disease policies and procedures   Prerequisites: The COVID-19 Infectious Disease Prevention Specialist (IDS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (0.80) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $95. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This is an independent study course that gives employees a comprehensive understanding of COVID-19 in the workplace. This course discusses risk reduction strategies to lower transmission rates of infectious disease in the workplace and provides a variety of methods to reduce employee exposure. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course. Upon successful completion of this course, the student will have acquired the knowledge, skills and abilities to: Recognize the signs and symptoms of COVID 19 Understand what actions to take if you become infected with COVID 19 Understand and use workplace controls to limit the spread of infection in the workplace Properly don and doff personal protective equipment Apply social distancing to coworkers and customers Proper cleaning and disinfection procedures for the removal of COVID from the workplace Prerequisites: The Infectious Disease Prevention Awareness Training (IDP) Course is a foundational course that requires no prerequisites. Continuing Education Units: (0.10) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs. Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam. Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $29. Tiered pricing: Tiered pricing is available for this course for companies with a large staff. 1-19 employees: $39.95/each 20-49 employees: $35.95/each 50-99 employees: $30.95/each 100+: $25.95/each Please contact our sales team at 800-922-2219 for details. Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here. Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Description: This course will provide a student with the knowledge necessary to work safely with and around crane and derrick equipment. The student will be able to identify:  the responsibilities of employers and employees, the safety requirements for various types of cranes and derricks, and the hazards associated with crane and derrick equipment. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Explain the responsibilities of employers and employees when it comes to crane and derrick safety. Identify the different types of cranes, derricks, and safety equipment needed when using them. Explain the various types of equipment inspections. Explain the safety issues with wire rope and power lines. Explain the safety requirements concerning the assembly, disassembly, ground conditions and operation for cranes and derricks. Identify the signals used to ensure safe crane and derrick operation and the different types of fall protection when using cranes and derricks. Explain how hazards can be avoided when using cranes and derricks. Explain safe practices for hoisting personnel and equipment and the qualification and training process for personnel involved with operating cranes and derricks.   Prerequisites: The Crane Derrick Safety Specialist (CDS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (1.30) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.

Course Description: Immerse yourself in NASP’s comprehensive DOT Drug and Alcohol Specialist Course, designed to equip you with the expertise and skills necessary to navigate the intricacies of drug and alcohol testing within the parameters of the Department of Transportation (DOT) mandates. Through our user-friendly online platform, students will be engaged in a comprehensive curriculum that encompasses the latest industry standards, regulatory requirements, and advanced testing methodologies. Acquire practical insights into sample collection procedures, testing protocols, result interpretation, and legal implications, ensuring a thorough understanding of the entire testing process. With interactive modules and expert guidance, this course enables you to develop the proficiency needed to conduct accurate and compliant drug and alcohol testing, promoting a safe and secure work environment in accordance with DOT regulations. Course curriculum is designed to satisfy the requirements of 49 CFR 382.603.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to:  Define and interpret DOT regulations as they relate to drug and alcohol testing, Recognize and identify common controlled substances and their effects, Identify, describe, and analyze the effects of alcohol on the body and mind and recognize the effects of alcohol impairment, Identify and differentiate the various stages of the drug and alcohol test procedures, from specimen collection to analysis, Implement procedures for post-incident testing and reasonable suspicion testing, Comprehend the consequences of non-compliance, Define and apply best practices for managing a DOT drug and alcohol program, Implement the proper requirements for maintaining accurate records of testing results   Prerequisites:  The DOT Drug and Alcohol Specialist (ADS) Course is a foundational course that requires no prerequisites.    Continuing Education Units: (0.70) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded to individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive certification. You have two opportunities to pass each exam.    Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $95.   Non-discrimination Policy:  NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document  here.    Proprietary Interest Disclosure:  The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document  here. 

Description: Hazardous materials are defined by the Secretary of Transportation as those materials and substances that are capable of posing an unreasonable risk to health, safety and property when transported in commerce. There are more than 800,000 hazardous materials shipments every day.   The U.S. Department of Transportation is responsible for developing, issuing and enforcing the Hazardous Materials Regulations which are found in Title 49, Code of Federal Regulations, Parts 171-180. If you are involved in the transportation of hazardous materials and need to know how to apply these regulations or how to teach them to others, this course is for you. Be sure you are in compliance with the regulations.   You will learn about the Hazardous Materials Table, Shipping Papers, Packaging, Marking, Labeling, Placarding, HAZMAT Classification, Emergency Response Information, Training of HAZMAT Employees, Transportation, Incident Reporting, the Emergency Response Guide, and Carrier Requirements for Highway, Air, and Rail. The required amount of time to complete the course is dependent upon your knowledge of workplace safety. You have up to six months to complete the course.   Upon successful completion of this course, the student will have the knowledge, skills, and abilities to: Utilize the instructions in the DOT's Emergency Response Guide Read and understand the Hazardous Material Table from the DOT regulations Specify HAZMAT shipping and packaging requirements Specify marking and labeling requirements for HAZMATs and specify carrier requirements for transporting HAZMATs.   Prerequisites: The DOT HAZMAT Specialist (DHS) Course is a foundational course that requires no prerequisites.   Continuing Education Units: (1.30) CEUs are offered for this course. As an IACET Accredited Provider, NASP offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard. CEUs will be reflected on the Certificate upon successful completion of the course and passing the exam. Partial credit or adjusted CEUs will not be awarded for individuals who do not successfully meet the criteria for achievement of CEUs.   Online Exams: The student will take a comprehensive online exam at the end of the course. You must score 80% to receive a certificate. You have two opportunities to pass the exam.   Recertification: A refresher course and exam will be required every three (3) years. The cost of this recertification is $150.   Non-discrimination Policy: NASP is committed to maintaining a work and learning environment free of all forms of discrimination. View the full document here.   Proprietary Interest Disclosure: The instructor(s) has no financial interest in any course documents, products, tools, or instruments. View the full document here.